learn.howToCalculate
learn.whatIsHeading
Surface roughness affects friction, wear, fatigue, and appearance. Proper specification prevents unnecessary cost or inadequate performance.
Hướng dẫn từng bước
- 1Measure Ra (average roughness) in micrometers or microinches
- 2Typical values: rough (3.2-6.3 μm), normal (0.8-1.6 μm), smooth (0.05-0.2 μm)
- 3Specify based on functional requirements
Ví dụ có lời giải
đầu vào
Bearing surface typically requires Ra <0.4 μm (smooth)
Kết quả
Specify fine grinding or lapping
Affects bearing life
Lỗi thường gặp cần tránh
- ✕Over-specifying finish (unnecessary cost)
- ✕Under-specifying and causing functional problems
Câu hỏi thường gặp
Why does roughness matter for bearings?
Rough surfaces cause higher friction and wear. Smooth surfaces reduce wear 10-100×.
Does fine surface finish improve fatigue strength?
Yes, polished surfaces have ~50% higher fatigue strength than rough surfaces.
Sẵn sàng để tính toán? Dùng thử Máy tính Surface Roughness miễn phí
Hãy tự mình thử →