Paano Kalkulahin si Pressure Vessel
Ano ang Pressure Vessel?
Pressure vessel stress depends on pressure, geometry, and material. Proper design prevents catastrophic failure; all vessels require rigorous analysis.
Pormula
Thin-walled hoop stress: σ = (P × r) / t
- P
- P value — Variable used in the calculation
Step-by-Step na Gabay
- 1Thin-walled hoop stress: σ = (P × r) / t
- 2Thin-walled longitudinal: σ = (P × r) / (2t)
- 3Thick-walled uses complex formulas; pressure determines stress
Mga Nalutas na Halimbawa
Input
Cylinder r=200mm, t=10mm, P=5 MPa
Resulta
Hoop stress ≈ 100 MPa
Governs failure mode
Mga Karaniwang Mali na Dapat Iwasan
- ✕Neglecting stress concentration at nozzles
- ✕Under-sizing vessel wall thickness
Mga madalas itanong
Why is hoop stress higher than longitudinal?
Hoop stress acts in two directions around vessel; only half the stress resists longitudinal loading.
How are vessel codes applied?
ASME Section VIII governs U.S. pressure vessel design; requires rigorous calculations and inspections.
Handa nang kalkulahin? Subukan ang libreng Pressure Vessel Calculator
Subukan ito sa iyong sarili →