learn.howToCalculate

learn.whatIsHeading

The 3D Print Time Estimator predicts FDM print duration from model volume, layer height, infill percentage, and print speed. Real-world print time depends on extrusion volumetric rate (mm³/s) and slicer settings; this calculator gives a baseline ±20% estimate before slicing.

Formel

Time (min) = Volume × (0.3 + 0.7 × Infill) / (Speed × Layer × 0.4 × 60) × 60

Steg-för-steg-guide

1Enter required inputs
2Calculator outputs key result and related metrics
3Review and compare scenarios

Lösta exempel

Ingång

50 cm³, 0.2mm layer, 60 mm/s, 20% infill

Resultat

~7 hours print time

Vanliga misstag att undvika

✕Forgetting to include all relevant inputs
✕Using outdated reference values

Redo att beräkna? Prova den kostnadsfria 3D Print Time Estimator-kalkylatorn

Prova själv →