Kako izračunati Gear Ratio
Kaj je Gear Ratio?
Gear ratio is the speed reduction/increase between input and output shafts. It determines torque multiplication and shaft speeds.
Formula
Ratio = N_input / N_output = N_driven / N_driver = T_output / T_input
Navodila po korakih
- 1Ratio = N_input / N_output = N_driven / N_driver = T_output / T_input
- 2Spur gears: ratio = number of teeth on driven / number on driver
- 3Power is conserved: P = T × ω
Worked Examples
Vnos
Input 1800 rpm, output 600 rpm
Rezultat
Gear ratio = 3:1 (3× speed reduction, 3× torque increase)
Power unchanged
Common Mistakes to Avoid
- ✕Confusing speed ratio with force multiplication
- ✕Neglecting friction losses in extended calculations
Frequently Asked Questions
Can any two gears mesh together?
No, they must have same pressure angle and pitch. Teeth must fit smoothly without interference.
How is efficiency handled?
Mechanical power loss (5-10%) converts to heat; P_out = P_in × η.
Ste pripravljeni na izračun? Preizkusite brezplačen kalkulator Gear Ratio
Poskusite sami →