learn.howToCalculate

learn.whatIsHeading

The 3D Print Time Estimator predicts FDM print duration from model volume, layer height, infill percentage, and print speed. Real-world print time depends on extrusion volumetric rate (mm³/s) and slicer settings; this calculator gives a baseline ±20% estimate before slicing.

Wzór

Time (min) = Volume × (0.3 + 0.7 × Infill) / (Speed × Layer × 0.4 × 60) × 60

Przewodnik krok po kroku

1Enter required inputs
2Calculator outputs key result and related metrics
3Review and compare scenarios

Rozwiązane przykłady

Wejście

50 cm³, 0.2mm layer, 60 mm/s, 20% infill

Wynik

~7 hours print time

Częste błędy do unikania

✕Forgetting to include all relevant inputs
✕Using outdated reference values

Gotowy do obliczeń? Wypróbuj darmowy kalkulator 3D Print Time Estimator

Spróbuj sam →