learn.howToCalculate
learn.whatIsHeading
The 3D Print Time Estimator predicts FDM print duration from model volume, layer height, infill percentage, and print speed. Real-world print time depends on extrusion volumetric rate (mm³/s) and slicer settings; this calculator gives a baseline ±20% estimate before slicing.
공식
Time (min) = Volume × (0.3 + 0.7 × Infill) / (Speed × Layer × 0.4 × 60) × 60
단계별 가이드
- 1Enter required inputs
- 2Calculator outputs key result and related metrics
- 3Review and compare scenarios
풀어진 예시
입력
50 cm³, 0.2mm layer, 60 mm/s, 20% infill
결과
~7 hours print time
피해야 할 일반적인 실수
- ✕Forgetting to include all relevant inputs
- ✕Using outdated reference values
계산할 준비가 되셨나요? 무료 3D Print Time Estimator 계산기를 사용해 보세요
직접 시도해 보세요 →