Quarter Note Delay
500 ms
Panduan lengkap segera hadir
Kami sedang menyiapkan panduan edukasi lengkap untuk BPM to Millisecond Delay Calculator. Kembali lagi segera untuk penjelasan langkah demi langkah, rumus, contoh nyata, dan tips ahli.
The BPM to Millisecond Delay calculator converts a musical tempo expressed in beats per minute (BPM) into precise delay times measured in milliseconds (ms) for every standard note value. This tool is essential for music producers, mixing engineers, and live sound technicians who need to synchronize delay effects, reverb pre-delay, and rhythmic processing with the tempo of a song. When a delay effect is not synchronized to the song's tempo, it creates a sense of rhythmic dissonance that can muddy a mix. By calculating the exact delay time in milliseconds for each note value — from whole notes down to sixty-fourth notes and their dotted and triplet variants — engineers can dial in delay taps that sit perfectly in the pocket of the groove. The relationship between BPM and milliseconds is straightforward: one beat at a given BPM corresponds to a specific number of milliseconds. A whole note is four beats, a half note is two, a quarter note equals one beat, and so on. Dotted notes add half their value again, while triplet subdivisions divide the standard value by 1.5. Modern digital audio workstations (DAWs) such as Ableton Live, Logic Pro, and Pro Tools can sync delay plug-ins automatically via tempo sync, but hardware delay units and vintage analog echo machines require manual entry of millisecond values. Knowing these values also helps engineers tune reverb pre-delay to enhance vocal clarity — setting pre-delay to around an eighth note at the song's tempo creates space between the dry vocal and the reverb tail. This calculator covers quarter, eighth, sixteenth, thirty-second, sixty-fourth notes, their dotted forms, and triplet equivalents, giving producers a complete toolkit for tempo-synchronized audio processing.
Delay (ms) = (60,000 / BPM) × Note Multiplier Note Multipliers: Whole=4, Half=2, Quarter=1, 8th=0.5, 16th=0.25, 32nd=0.125, 64th=0.0625 Dotted: multiply by 1.5; Triplet: multiply by 0.667
- 1Step 1: Determine the tempo of your track in BPM.
- 2Step 2: Calculate the quarter-note delay time: Quarter (ms) = 60,000 / BPM.
- 3Step 3: Multiply the quarter-note value by the appropriate note multiplier to get other note values.
- 4Step 4: For dotted notes, multiply the base note value by 1.5.
- 5Step 5: For triplet notes, multiply the base note value by 0.667.
- 6Step 6: Enter the resulting ms value into your delay unit or DAW parameter.
60,000 / 120 = 500 ms. At 120 BPM a quarter note lasts exactly half a second, which is the most common slapback and rhythmic delay setting.
60,000 / 128 = 468.75 ms per quarter note × 0.5 = 234.375 ms. This creates a tight eighth-note echo that reinforces the groove without stacking too much on top of the dry signal.
60,000 / 90 = 666.67 ms × 0.5 × 1.5 = 500 ms. The dotted eighth delay is famous for The Edge's guitar sound — it creates a cascading triplet-feel without being a strict triplet.
60,000 / 140 = 428.57 ms × 0.25 × 0.667 = 71.43 ms per triplet subdivision × 2 = 142.86 ms. Useful for complex rhythmic patterns in electronic and hip-hop production.
60,000 / 100 = 600 ms × 0.125 = 75 ms. A 32nd note at 100 BPM gives 75 ms, which can be used as a generous pre-delay on a lead vocal reverb to separate it from the dry signal.
Setting delay pedals and rack units for live guitar performance, enabling practitioners to make well-informed quantitative decisions based on validated computational methods and industry-standard approaches, which requires precise quantitative analysis to support evidence-based decisions, strategic resource allocation, and performance optimization across diverse organizational contexts and professional disciplines
Dialing in reverb pre-delay for vocal clarity in a mix, helping analysts produce accurate results that support strategic planning, resource allocation, and performance benchmarking across organizations, where accurate numerical computation is essential for producing reliable outputs that inform planning, evaluation, and continuous improvement processes in both corporate and individual settings
Programming rhythmic arpeggiators and sequencers, allowing professionals to quantify outcomes systematically and compare scenarios using reliable mathematical frameworks and established formulas, demanding systematic calculation approaches that translate raw input data into actionable insights for stakeholders who depend on quantitative rigor in their daily professional activities
Syncing LFO rates in synthesizers to musical tempo, supporting data-driven evaluation processes where numerical precision is essential for compliance, reporting, and optimization objectives, necessitating robust computational methods that deliver consistent and verifiable results suitable for reporting, auditing, and long-term trend analysis in professional environments
Film scoring and sound design tempo synchronization, which requires precise quantitative analysis to support evidence-based decisions, strategic resource allocation, and performance optimization across diverse organizational contexts and professional disciplines
Tempo Sync in DAWs
Modern DAWs automatically calculate and update delay times in milliseconds when you set a delay plugin to 'sync' mode. The DAW reads its internal tempo map and feeds the correct ms values to the plugin in real time, including during tempo changes and ritardandos.
Ping-Pong Delays
Ping-pong delays alternate between left and right channels. Each channel typically gets half the note value, so a quarter-note ping-pong at 120 BPM would send 250 ms to the left and 250 ms to the right, creating a stereo bounce that completes one full cycle in 500 ms (one quarter note).
Feedback and Echo Buildup
Professionals working with bpm to ms delay should be especially attentive to this scenario because it can lead to misleading results if not handled properly. Always verify boundary conditions and cross-check with independent methods when this case arises in practice.
| BPM | Whole (ms) | Half (ms) | Quarter (ms) | 8th (ms) | 16th (ms) | Dotted 8th (ms) |
|---|---|---|---|---|---|---|
| 60 | 4000 | 2000 | 1000 | 500 | 250 | 750 |
| 80 | 3000 | 1500 | 750 | 375 | 187.5 | 562.5 |
| 100 | 2400 | 1200 | 600 | 300 | 150 | 450 |
| 120 | 2000 | 1000 | 500 | 250 | 125 | 375 |
| 128 | 1875 | 937.5 | 468.75 | 234.375 | 117.2 | 351.6 |
| 140 | 1714 | 857 | 428.6 | 214.3 | 107.1 | 321.4 |
| 160 | 1500 | 750 | 375 | 187.5 | 93.75 | 281.25 |
| 174 | 1379 | 689.7 | 344.8 | 172.4 | 86.2 | 258.6 |
Why do I need to convert BPM to milliseconds?
Most hardware delay pedals, rack units, and vintage analog delays do not have a tempo-sync feature. They accept a numeric value in milliseconds rather than a musical note designation. By converting your song's BPM into exact millisecond values, you can set those units to play rhythmically in time with the music, creating musically coherent echoes rather than arbitrary repeats that fight the groove.
What is the most popular delay time in pop and rock music?
The dotted eighth-note delay has become one of the most iconic sounds in modern music, associated with artists like The Edge of U2, David Gilmour, and many contemporary pop guitarists. It creates an interesting interplay with the beat because it falls slightly off the main beats, generating a shimmering, cascading feel. The eighth-note delay is also extremely common in hip-hop and electronic music for tight, rhythmic echo effects.
How does reverb pre-delay relate to BPM?
Reverb pre-delay is the gap between the direct sound and the onset of the reverb tail. Setting this in tempo-sync with the track helps the reverb feel musically natural. A pre-delay of roughly a 32nd note at the song's tempo is a common starting point for vocals, giving enough space for the dry signal to be heard before the reverb blooms, improving clarity without making the reverb feel disconnected from the music.
What does 'dotted' mean in music and how does it affect delay time?
A dotted note has its duration extended by half its original value. So a dotted quarter note equals 1.5 quarter notes in duration. For delay calculation, you multiply the base note's delay time by 1.5. A dotted eighth at 120 BPM = (60,000/120) × 0.5 × 1.5 = 375 ms. This creates a rhythmic delay that falls between the main beats, adding syncopation and interest to the sound.
What is a triplet note value and how is it calculated?
A triplet divides a beat into three equal parts instead of two. Three eighth-note triplets fit in the space of two regular eighth notes. To calculate a triplet delay, divide the base note value by 1.5 (or multiply by 0.667). At 120 BPM, an eighth-note triplet delay = 500 × 0.5 × 0.667 = 166.67 ms. Triplet delays are common in R&B, jazz, and gospel to create a swung, off-kilter rhythmic feel.
Can I use multiple delay times simultaneously?
Absolutely. Using multiple delay lines set to different rhythmic values creates complex, layered rhythmic textures. A common technique is to blend a quarter-note and a dotted-eighth delay at different levels and feedback settings. This creates a pseudo-polyrhythmic feel where echoes interact with each other in musically interesting ways. Many delay plug-ins like Soundtoys EchoBoy or Valhalla Delay support multiple tap points.
How accurate does the millisecond value need to be?
For most musical applications, rounding to the nearest whole millisecond is acceptable and often indistinguishable to the human ear. Human rhythmic perception has a threshold of roughly 5–10 ms for noticing timing differences. However, for technically precise applications like film scoring or electronic music with extremely tight grooves, using exact decimal values (like 468.75 ms at 128 BPM) can prevent subtle drift over many delay repeats, especially when using high feedback settings.
Does the delay time change if I change the BPM mid-song?
Yes. If your song has a tempo change, the delay time must be recalculated and updated for each new BPM section. In a DAW with tempo-synced delay plug-ins, this happens automatically through the tempo track. On hardware units or manual setups, you would need to re-enter the new millisecond value for each tempo section. Live performers who use tempo-changing setups often use MIDI-controlled delays that accept tap-tempo input to keep things in sync.
Tip Pro
Start with a dotted eighth-note delay at a moderate feedback (20–35%) and mix level (15–25%) for guitar or synth pads — it adds rhythm and depth without cluttering the mix. Use a high-cut filter on the delay returns to prevent harshness.
Tahukah Anda?
The Edge of U2 famously uses a dotted eighth-note delay almost exclusively. His guitar tech sets the delay time before every show by calculating the ms from the setlist's BPM values. Songs like 'Where The Streets Have No Name' and 'Pride' are built around this effect.
Dapatkan Tips Matematika Mingguan
Bergabunglah dengan pelanggan 12.000+ yang mendapatkan tip kalkulator setiap minggu.