learn.howToCalculate
learn.whatIsHeading
Belt drive transmits power between shafts using flexible belt around pulleys. It's simple, quiet, and provides overload protection through slipping.
सूत्र
Calculate: Speed ratio = D_driven / D_driver where D is pulley diameter
- D
- D value — Variable used in the calculation
चरण-दर-चरण मार्गदर्शिका
- 1Calculate: Speed ratio = D_driven / D_driver where D is pulley diameter
- 2Torque: T = P / ω (power divided by angular velocity)
- 3Tension and slippage determine power capacity
हल किए गए उदाहरण
इनपुट
Driver 100 mm diameter at 1800 rpm, driven 200 mm
परिणाम
Output speed = 900 rpm, 2:1 reduction
Torque doubles
सामान्य गलतियां जिनसे बचना है
- ✕Over-tensioning belts (damages bearings)
- ✕Neglecting wrap angle effects on friction
अक्सर पूछे जाने वाले प्रश्न
Why slip in belt drives?
Slight slip absorbs shock loads, protects driven equipment. Slip is normal (1-3%) and expected.
How do you prevent excessive slip?
Proper belt tension and friction material selection maintain power transmission.
learn.ctaText
इसे स्वयं आज़माएँ →