Podrobný průvodce již brzy
Pracujeme na komplexním vzdělávacím průvodci pro pH na vodíkový iontový konvertor. Brzy se vraťte pro podrobné vysvětlení, vzorce, příklady z praxe a odborné tipy.
The pH to Hydrogen Ion Converter calculates hydrogen ion concentration [H⁺] in moles per liter from pH value, and pOH (the corresponding hydroxide measure) using the relationships [H⁺] = 10⁻ᵖᴴ and pOH = 14 − pH (at 25°C water autoionization). Essential for chemistry students, lab technicians, water quality analysts, agriculture (soil pH affects nutrient availability), aquarium keepers, brewers, swimming pool maintenance, and clinical settings. The pH scale was introduced by Søren Sørensen in 1909 as a convenient logarithmic way to express hydrogen ion concentration. Pure water at 25°C has [H⁺] = 10⁻⁷ M = pH 7 (neutral). Acidic solutions have higher [H⁺] and lower pH: vinegar pH 2.4 means [H⁺] = 10⁻²·⁴ = 0.004 M, ~63,000× more H⁺ than water. Basic solutions: ammonia pH 11.5 means [H⁺] = 10⁻¹¹·⁵ = 3×10⁻¹² M, ~32,000× less H⁺ than water. Each pH unit represents a 10× concentration change — the logarithmic scale compresses huge concentration variation into the familiar 0–14 range. Common pH references: Stomach acid 1.0–2.5 (pH 1 = 0.1 M HCl). Lemon juice 2.0–2.6. Vinegar 2.4–3.4. Black coffee 5.0. Saliva 6.2–7.6. Pure water 7.0. Blood 7.35–7.45 (very tightly regulated; outside 7.0–7.8 is life-threatening). Sea water 8.1. Baking soda solution 9.0. Ammonia 11.5. Bleach 12.5. NaOH solution 14.0. The narrow range of biological pH (blood, cells) reflects how tightly organisms must regulate H⁺ — small changes have dramatic biological effects. pOH and water autoionization: at 25°C, [H⁺][OH⁻] = 10⁻¹⁴ (water ionization constant Kw). Taking log: pH + pOH = 14. Knowing one tells you the other. At pH 4 (acidic), pOH = 10 (low hydroxide). At pH 10 (basic), pOH = 4 (higher hydroxide). The relationship pH + pOH = 14 is temperature-dependent — at 100°C, water Kw shifts and pH+pOH ≈ 12. Calculator assumes 25°C standard reference.
- 1Step 1 — Enter pH value (typically 0–14, can be slightly outside this range)
- 2Step 2 — Calculator computes [H⁺] = 10⁻ᵖᴴ — outputs in scientific notation
- 3Step 3 — Computes pOH = 14 − pH
- 4Step 4 — Categorizes solution: pH < 6 acidic, 6–8 near neutral, > 8 basic
- 5Step 5 — Outputs all three values for chemistry homework or lab work
- 6Step 6 — For [OH⁻], use [OH⁻] = 10⁻ᵖᴼᴴ
- 7Step 7 — Verify result: [H⁺] × [OH⁻] should equal 10⁻¹⁴ at 25°C
Reference standard. Pure water at 25°C has equal H⁺ and OH⁻ concentrations.
Vinegar is ~31,000× more acidic than water on H⁺ basis. Still mild enough for cooking and consumption.
Blood pH is tightly regulated 7.35–7.45; outside 7.0–7.8 is life-threatening
Blood buffer systems (bicarbonate, hemoglobin) maintain this narrow range. Acidosis (low pH) and alkalosis (high pH) are medical emergencies.
Household bleach is a strong base. Very low [H⁺] (12.5 orders of magnitude below 1 M).
Chemistry homework and lab calculations
Water quality testing
Aquarium pH management
Hydroponic / soil pH for gardening
Brewing and fermentation (yeast pH tolerance)
Swimming pool chemistry
Medical / clinical (acid-base balance)
Industrial process pH control
Can pH be outside 0–14?
Yes — pH can be negative or above 14 in extreme cases. Concentrated HCl (12 M) has pH ≈ −1. Concentrated NaOH (10 M) has pH ≈ 15. The 0–14 range is typical because most solutions involve water dilution; very concentrated strong acids/bases can exceed these limits. The pH formula still applies — extreme values just mean unusually high H⁺ or OH⁻ concentration.
Why is the pH scale logarithmic?
Hydrogen ion concentration varies over 14+ orders of magnitude in chemistry (10⁰ to 10⁻¹⁴ at minimum). Linear scale (0.1 M, 0.01 M, etc.) would be unwieldy. Logarithmic compression (pH = −log[H⁺]) converts the wide concentration range to memorable 0–14 numbers. Each pH unit represents 10× concentration change — small pH movements correspond to large biological/chemical effects.
Does pH change with temperature?
Yes. Water's autoionization constant Kw changes with temperature: at 0°C, Kw ≈ 10⁻¹⁵, so neutral pH is 7.5. At 25°C (standard), neutral pH = 7. At 100°C, Kw ≈ 10⁻¹², neutral pH ≈ 6. So pH 7 water at boiling is slightly basic. Most pH measurements assume 25°C. For pure thermodynamics work, temperature corrections matter.
What's the difference between pH and pOH?
pH measures hydrogen ion concentration; pOH measures hydroxide concentration. They're complementary: pH + pOH = 14 (at 25°C). When solution is acidic, pH is low and pOH is high. When basic, vice versa. Use whichever is more convenient — chemists usually report pH. The pOH scale is useful when working primarily with bases or analyzing autoionization.
How is pH measured in practice?
Three main methods: (1) pH paper / litmus / indicator strips — quick, cheap, ±0.5 pH accuracy. (2) Liquid indicators (phenolphthalein, bromothymol blue) — used in titrations. (3) Electronic pH meter — most accurate (±0.01 pH for good models), requires calibration with reference buffers (pH 4, 7, 10 typical). Lab work uses meters; field work often uses strips for speed.
Pro Tip
Every 1 pH unit change = 10× concentration change. pH 4 is not '57% more acidic than pH 7' — it's 1000× more acidic. Stomach acid at pH 1 vs neutral water at pH 7 is 1 million× more H⁺. The logarithmic scale makes huge concentration differences look modest; remember to think in orders of magnitude.
Získejte týdenní matematické tipy
Připojte se k 12 000+ odběratelům, kteří každý týden dostávají tipy na kalkulačku.